callaccounting.ws forum
callaccounging.ws => Call Accounting Mate Q&A => Topic started by: hdevito on February 21, 2008, 04:49:46 PM
-
Good day, I have a company with 6 PBX's in different locations. Can all of these PBX's be connected to the call accounting mate at once? the dial plan on these PBX's is integrated meaning there is no two PBX's with the same extension numbers.
-
Call Accounting Mate can support more than one PBX connection. However if your PBXs are deployed at multiple locations and utilize an Serial Port (RS-232) then it is unlikely you will be able to connect them to a single Call Accounting Mate system. For this type of environment you may need to deploy additional hardware or purchase a copy of CAM for each site. Please email us at sales@callaccounting.ws with a list of each PBX type deployed and the type of connections being used to generate and capture SMDR. Once we receive this information we can determine if we can support this through a single CAM license.
-
I have my friend who is also asking me this question: "Can all types of PBX can be connected as one?" On this discussion, I knew that it is possible. Thanks!
_________________
offshore staffing solutions (http://www.ievolveusa.com/)