callaccounting.ws forum

callaccounging.ws => Call Accounting Mate Q&A => Topic started by: Administrator on December 07, 2004, 10:54:06 AM

Title: How to request for a development of a parser
Post by: Administrator on December 07, 2004, 10:54:06 AM

To develop a new parser for your PBX, we need to have the SMDR or call samples that are produced from your equipment.
You can either email this information to support@callaccounting.ws or send us an automated email from within
CAM.

To send us the files manually:

The necessary files are:
c:\bill\smdrlog.txt   
and
c:\bill\billlog.txt

These files can be created by downloading CAM and using the default image parser  "Data Collection Driver.js".   Please allow your system to store a number of calls before emailing the parser request.   You can email us at support@callaccounting.ws.

OR

To send the data/log from within CAM, please read the following document :

http://www.callaccounting.ws/howto/How to make request for dirver.mht

If you have any problems, please contact support@callaccounting.ws (http://support@callaccounting.ws)