CAM does support the Siemens HiPath 3500. Have you configured the Siemens switch to deliver the data to an IP address and a Port or is the switch configured as a socket listener. Depending on the method selected different configuration settings are required within CAM.
If the Siemens switch is configured to send the data to an IP Address then please use the following steps.
1. Select the PBX Communications settings option from the Configuration menu.
2. Click the Port tab.
3. Set the Port drop down list box option to TCP.
4. Set the Port text box to the Port number configured in your Siemens PBX.
5. Press the Save button.
If the Siemens switch is configured as a Socket listener (i.e. CAM must connect to it before it starts sending data) then use the following steps.
1. Select the PBX Communications settings option from the Configuration menu.
2. Click the Port tab.
3. Set the Port drop down list box option to Telnet.
4. Set the Server Name or Address box to the IP Address of the Siemens PBX.
5. Set the Server Port to the Port number configured in your Siemens PBX.
6. Press the Save button.
Please note, CAM will not collect data if the trial period has expired. If you need to have a trial period extend please contact our support group at
support@callaccounting.ws.
We apologize for the delay in responding but unfortunately we were experiencing issues with our servers. For fast, immediate responses please email your questions directly to our support department at
support@callaccounting.wsThank you.