Author Topic: Max. number of PBX sessions.  (Read 10517 times)

hakeem

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
    • View Profile
    • Email
Max. number of PBX sessions.
« on: October 04, 2009, 09:01:26 AM »
My Dear.

How many PBX sessions can be built simaltenously using one accounting system (PBXs support TCP/CDR)?

we have 8 pbxs connected together over IP (Nortel, cisco and AVAYA). So this also required different type of settings  to communicate with them.

Regards

Administrator

  • Administrator
  • Super User
  • *****
  • Offline Offline
  • Posts: 171
    • View Profile
Re: Max. number of PBX sessions.
« Reply #1 on: December 18, 2009, 10:42:49 AM »
Although there is no theoretical limit to the maximum of PBX's CAM can support there are processing limits that you will encounter. If these are large PBX's I would recommend you purchase a CAM license for each PBX and then use access each CAM license via your browser. Additionally, if the PBX's being utilized only support a serial connection then the CAM software will need to be either located at the same location as the phone system or may require a hardware buffer. Since hardware buffers usually cost significantly more than CAM I would recommend you install an additional license of the CAM software at these locations.